Zalman Z3 Iceberg Black, Midi Tower, PC, Schwarz, ATX, EATX, micro ATX, Mini-ITX, Kunststoff, Stahl, Gehärtetes Glas, 16,3 cm

Zalman Z3 Iceberg Black
ATX Middle tower computer case black

Minimalistic Design
A minimalistic design inspired by a glacier and its minimal lines

Aesthetic and Functional
Elegant front design inspired by the glacier ensures a smooth airflow as well as aesthetic

Maximum Airflow and Ventilation
2 pre-installed 120mm ARGB fans (Front x 1, Rear x 1) and optimized ventilation provide quick heat dissipation from the case (Up to 8 fans can be supported)

Supports Addressable RGB
? How to control RGB LED
- LED colors & patterns can be changed by pressing the LED Button on I/O ports.
- Long pressing on the LED Button for 6 seconds, RGB LED will be turn off after blinking twice in white.
- Long pressing on the LED Button for 3 seconds, RGB will be synchronized with motherboard after blinking once in white.
- Press the LED Button again to desynchronize with motherboard.

Fan Specifications (Addressable RGB LED Fan)
• Dimensions : 120 x 120 x 25(T)mm
• Bearing Type : Hydro Bearing
• Max Fan Speed : 1,200 RPM ±10%
• Max Airflow : 37.8 CFM
• Air Pressure : 0.7mm H2O
• Noise Level : 26.4 dB(A)
• Life Span : 40,000 hours

Easy-to-use Slide Glass Side Panel & Tempered Glass
A thick 4mm tempered glass panel allows for easy viewing of the internal computer components.
The tempered glass side panel is protected utilizing an edge guard ensures the tempered glass panel will not slide out of proper placement during installation and removal. This edge guard protects the glass and makes it relatively vulnerable to impact and allows for access with removal of only 2 hand tightened screws.

Easy accessible design on top I/O ports
Z3 ICEBERG comes with two USB3.0 ports and its I/O port is placed on the right side of the chassis to provide great experience on cable management.
Power Button(LED), Reset Button, LED Control Button, Headphone Jack, Microphone Jack, USB2.0 Port, USB3.0 Ports

Cable-Management-Friendly Chassis
Carefully designed chassis to minimize cable management difficulties
* Upper I/O port is on the right side with rubber covers applied to unused holes for cable management

Top Magnetic Dust Filter
Protects your components and provides unobstructed airflow through dust filtration

Bottom Dust Filter
Protects your power supply from piling up dust

Fan Support
Front : 3 x 120mm / 3 x 140mm
Top : 2 x 120mm / 2 x 140mm
Rear : 1 x 120mm
Bottom : 2 x 120mm

Radiator Configuration
Front : 120mm / 240mm / 280mm / 360mm
Top : 120mm / 240mm
Rear : 120mm

Specifications
Model: Z3 Iceberg Black
Materials: Steel, Plastic, Tempered Glass
Weight: 6.4kg
Dimensions: 410(D) x 210(W) x 480(H)mm
Case Form Factor: ATX Mid-Tower
Motherboard Support: E-ATX (~280mm), ATX, mATX, Mini-ITX
Fans Support: Front 3 x 120mm / 3 x 140mm, Top 2 x 120mm / 2 x 140mm, Rear 1 x 120mm
Fan(s) Included: Front 1 x 120mm (Addressable RGB), Rear 1 x 120mm (Addressable RGB) ARGB Controller Included
Drive Bays: 2 x 3.5” (2 x Combo, 1 x Toolless), 4 x 2.5”
Radiator Support: Front 120mm / 240mm / 280mm / 360mm, Top 120mm / 240mm, Rear 120mm
Max. VGA Length: 315mm
Max. CPU Cooler Height: 163mm
Max. PSU Length: 210mm
PCI Expansion Slots: 7
I/O Ports: 1 x Headphone, 1 x Mic, 1 x USB 2.0, 2 x USB 3.0, Power Button, Reset Button, LED Button
Product code: Z3 Iceberg Black